Lean tube accessories are mostly used for supporting lean tubes and play some auxiliary functions. It is mainly divided into 15 items, which are as follows:
1) Plastic end cap: made of plastic, injection molded, divided into two types, 1.0 wall thickness and 1.5 wall thickness of the lean tube with the same large diameter end cap, 2.0 wall thickness lean tube with small diameter end cap.
2) Desktop flat washer: The material is rubber, with high resilience and high tensile strength, strong toughness, and good shock and cushioning performance. Closed cell structure, non-absorbent, moisture-proof, water-resistant and easy to hot press, cut, glue, fit and other processing.
3) Plastic foot cover: The material is plastic and injection molded to protect the ground and beautiful.
4) Connector Bushing: The material is made of plastic and is injection molded. It is used inside the complete set of connectors to rotate.
5) Harness separator: Made of plastic, injection molded, used for lean tube hooks with outer diameter of 28MM.
6) Hanging label holder: The material is made of plastic and is injection-molded. It is used for the Lean tube round tube identification card holder line card with outer diameter of 28MM.
7) Hanging label bag: made of plastic, transparent label bag, used with hanging tag holder to prevent identification files.
8) Single-sided desktop chuck: The material is galvanized with carbon steel. According to the thickness of the plate, different lengths of self-tapping screws are selected for the connection between the desktop/wood board and the φ 28 wire rod.
9) Bilateral table top: The material is galvanized with carbon steel. According to the thickness of the plate, different lengths of self-tapping screws are selected for the connection between the table/wood board and the φ 28 line bar.
10) Hook: The material is white steel plated with zinc steel, which is divided into left and right hooks.
11) M6*25 screw nut: The material is made of carbon steel galvanized and carbon steel electrophoresis black, which is used for the fitting parts of the lean tube.
12) M8*40 screw nut: The material is galvanized with carbon steel and used for the installation of caster splint.
13) ferrule: The plastic ferrule can directly fix some fluent strips on the square tube angle steel shelf.
14) Brake pad: The material is galvanized with carbon steel, which is used to block the turnover box from falling down and reduce the cushioning force.
15) Hook: The material is galvanized with carbon steel, and the hooks are divided into 200mm, 300mm and 400mm. Kind of length.
Wire rod accessory product breakdown
Plastic end cap
Desktop flat washer
Plastic floor cover
Suspension tag holder
Hanging label bag
Single-sided desktop chuck
Blue and white zinc
Bilateral desktop chuck
Blue and white zinc