Metal attachment

28 aluminum bar metal accessories

Aluminum alloy lean pipe profiles are mostly used in industrial assembly lines or production workshops, mainly used for rapid assembly of lean production equipment in assembly line workshops, such as: lean tube workbench, storage shelves, material turnover vehicles, etc., but after in-depth application research and development, expansion A variety of functional lean pipe fittings are available to meet various simple actions, which facilitates the connection between lean pipe equipment and optimizes the lean production process;

28 aluminum bar metal accessories are mainly divided into 23 specifications:

1) Table plate fixing buckle: used for fixing the table top.

2) Caster fixing component: the connection of the flat caster to the bottom frame.

3) Sliding sleeve positioning ring: used for the side limit of the sliding sleeve on the horizontal direction of the rod.

4) Strong positioning seat: used for vertical positioning of the sliding rod on the line bar.

5) Elastic metal accessories: used to fix the frame sealing plate or install other accessories at any position.

6) Hanging ring buckle: It is used for the wearing of multiple craft cards, which is convenient for page-turning.

7) Opposite hinge assembly: The application of the movable table can also be used for product design with a folded structure.

8) Rotating component: The outer connecting rod is connected with the wire rod, and the two sets are combined to form a structure similar to the roller shaft.

9) Metal plug: It can prevent the end face of the product from being worn. It can also be used to make a 28-line bar counterweight cover.

10) Angle Fixed Connector: For product design at any angle, multiple combinations can be designed for a specific geometry.

11) Aluminum alloy split foot: It can be used with metal foot cup for anti-static occasions, and can also be installed with 4 inch or less wheel diameter screw casters.

12) T-type slider: used with T-shaped bar (Note: 28 and 43 series universal)

13) T-slider: used with RTAE28-05

14) Non-slip foot cup: suitable for high-profile, non-slip or protective occasions of workbench and other supported products.

15) Nylon foot cup: Highly fine-tuned, universal foot cup for workbench and other supported products.

16) Metal foot cups: Suitable for highly fine-tuned, anti-static or anti-wear applications on workbenches and other supported products.

17) Linear sliding sleeve: Installed on a 28-line rod, it can realize axial horizontal linear sliding.

18) Linear rotating sleeve: Installed on a 28-wire rod, it can realize axial horizontal linear sliding, and colleagues can rotate at any angle around the axis.

19) Dual power supply strip: used for power supply of electrical and electronic equipment and tools on production lines or stations.

20) Triple power strip: It is used for power supply of electrical and electronic equipment and tools on production lines or stations.

21) T-slot bar block: used for T-slot wire rod end mats, also for transfer purposes.

22) Rotator: It can be used as a bearing housing to design a rotating device.

23) Linear rolling assembly: with 28-line bar for linear motion.

Aluminum wire rod metal accessories product breakdown