50 bright industrial aluminum profiles
50 series bright surface industrial aluminum profiles
50 series industrial aluminum profile product introduction:
1) 50 industrial aluminum profiles are mainly used in frame aluminum profiles with high load-bearing capacity, large stress requirements, and heavy-duty structures with high support requirements, and the frame structure is firm;
2) 50 industrial aluminum profiles have good expandability. The slot design of industrial aluminum profiles makes it unnecessary to disassemble profiles during the installation process. Bolts and nuts can be installed at any position . The process of modifying the aluminum profile frame is simple and easy to operate;
3) 50 industrial aluminum profiles are treated with anodized silver white brightening, aluminum profile frame products are anti-oxidation and anti-corrosion, simple and beautiful, without painting;
At the same time, our production of industrial aluminum profiles are European standard large hole profiles (aperture φ12), in addition to the above advantages, there are the following advantages:
1)In addition to the conventional connecting parts, our 50 industrial aluminum profiles can be used. In addition, there are special matching anchor pins that can be used. The anchoring pins are used for high strength, good concealment, and connection and locking functions. To ensure that there is no gap at the joint, only one T-slot is occupied when connecting, which is convenient for installing aluminum-plastic panels, nets and other accessories.
2) Our 50 industrial aluminum profiles, large holes on the end face facilitate the connection of hoof feet and caster casters. The center hole is large and you can choose the M12 hoof and the caster caster (the strength is higher than the M8 hoof and caster). No additional adapter plate is required. Beautiful in appearance and easy to install.
At the same time, our unique anchor-type connecting pin can be used for connection at any angle. It does not need to process special angle connecting plates, which has good concealment and good appearance.
50 series industrial aluminum profile product classification
Moment of inertia Lx (cm 4 )
Moment of inertia Ly (cm 4 )
Bending moment Wx (cm 3 )
Bending moment Wy (cm 3 )
50*50 4 slots
50*50 4-slot heavy duty
50*100 6 slots
100*100 8-slot heavy duty